Siemens Pads Standard Plus VX.2.14 / Pro VX.2.10 x64 – Download Now

Description

Mentor Graphics PADS software is capable of designing and manufacturing printed circuit boards (PCBs). PCB engineers and designers are always looking for reliable and high quality tools. Mentor Graphics PADS software is a simple way to mediate the potential of schematics, circuit design, layering in printed circuits and powerful tools. This app contains all the components information in one central location, as evidence this will prevent duplicate parts from being made, reducing design time and avoiding rework.

If you need to design boards that have a high percentage of signal broadband, in which to fully appreciate the importance of the use of driven design constraints, you will., The PADS system is great for managing all the restrictions circuits, and whiskers that are very comfortable for users, can limit your desired construction, review and evaluation. The possibility of designing various reports is provided on this program, as well as the possibility of comparing various designs, being the best, the layout advanced the product, making the design of printed circuit boards possible with the ability to print. This application is sure to design the range that is not too high in complexity, ideal.

Features and technical software Mentor Graphics Pad:

Design the schematic circuit
Simulation Online Circuit Design
Selecting component options, and evaluating them within the part
Checker and powerful filtering with management information supports various
Possibility of creating patterns compatible with IPC
Management restrictions for integrated
Very fast, restrictive and accurate routing
Health check prompts using hyperlinks
Simulation of analog circuits and thermals
The Central Library consists of various components
And …

System Requirements

32-bit operating system: Windows 10, Windows 8.1 and Windows 7 SP1
64-bit operating system: Windows 10, Windows 8.1, and Windows 7 SP1
Memory Requirements: 8GB RAM (minimum)
Disk space requirements: Download
~3.3 GB Installation 7 GB
For the sake of argument:
Operating system: Windows 10, Windows 8.x, Windows 7, Windows XP Professional (SP3), Windows Vista (SP1)
Minimum 1 GB memory

Images Advisor Graphics Pad

Mentor Graphics Pad Screenshots

installation Guide

The crack is provided in the readme file included in the folder.

It’s worth noting that the MentorGraphics software does not typically run on virtual systems!

Pad Pro VX.2.10 Version:

Use the MentorKeyGen Tool V1.3.1e.exe crack and the readme file next to it.

Pad VX.2.7/2.8 Pro Version:

From the Crack folder, run the MakeLic.bat file to create the Licensefile.dat file
Create a folder called MentorGraphics in the root of the C drive and copy the generated Licensefile.dat file into it (C:\MentorGraphics)
Run the environment.reg file
From the Setup folder, run the setup.exe file and click Install Product
During installation, select Yes when the Licensing not found message is displayed
Select Import Licenses, click Next and then Browse. In the window that opens, from the bottom left corner, change the value of File Type to License Files (*.dat), navigate to C:\MentorGraphics and select the Licensefile.dat file.
Click Next and then Done
* If the installation page does not display properly, close the page and run setup.exe again
Follow the installation steps
In the Post Installation Script step, click I want to continue through the licensing setup and click Next
Select the Mobile Compute and MGLS Licensing default values and click Next
Click Browse, select License Files (*.dat) from the bottom right corner and select the C:\MentorGraphics\licensefile.dat file.
Click next and proceed further
The software is now ready to use

PADSvx.2.2

This is for PADSVX.2.2 but works for any VX version of PADS, Standard and Standard Plus
1. Run the setup in the default folder (C:\MentorGraphics)
2. Skip the license install
3. Modify the installation as follows:
a) Change the target path to the C:\MentorGraphics\PADSVX folder you created earlier
b) Select all the packages available for install from the product selection, then deselect the following:
– check for updates
– Design Archive
– Server Tools
4. Now run the installation.
5. During installation you will be asked to unregister the older versions of PADS (9.5 and 2005). Click Yes on that. You can use the release switcher to switch back to either one later.
6. After the install is finished, copy the MentorKG.exe and run.bat found in the Crack folder to the C:\MentorGraphics\PADSVX folder.
From there run “run.bat” and wait until it generates a license file (a notepad should open license.txt)
Save this file as PADSVX_LICENSE.TXT in the C:\MentorGraphics\PADSVX folder
7. Now run the PADSVX setup again (PADSVX.2.2_mib.exe), and this time don’t skip the license installation. Click Next to proceed to the license setup. Select the first option (Mobile, Compute, Node-Locked Licensing), click Next and browse to the PADSVX_LICENSE.TXT that you saved earlier in the C:\MentorGraphics\PADSVX folder. This will add the PADSVX license to the existing licenses (9.5 and 2005). When asked if you want to add another license, click No.
8. Everything should now be ready to use. You will find the programs under START\PADSVX2.2. It does not create shortcuts to them, so you will need to do that yourself. Check if the PADSVX layout is working properly (make sure before doing anything else)
9. At any time, if you wish to revert to a previous version of PADS (9.5 or 2005), use the MGC BSD Release Switcher found under START/Mentor Graphics PCB Admin Utilities.
In the upper list, select the product you want to unregister (Deactivate) and in the lower list, the one you want to register (Activate). Click OK and it will take a few minutes to work. During the switch you will be asked if you want to configure the license. Select “I have a valid license. I would like to skip the licensing setup”.
Click Next and choose the working directory. This is the folder where PADS puts all the default folders (CAM, Reuse,…etc). It doesn’t really matter which folder you choose, as you should configure these folders in PADS/OPTIONS. They are saved in the PADS ini file, so whenever you switch to a release, it should use the folders defined in that release’s ini file.
Click Finish, and after the installer registers a few more files, it should be done. Click Finish again.